Product introduction
The G5405644 exhaust manifold reduces cylinder exhaust interference through optimized channel design, improves turbocharger response speed, and meets T4 emission standards. It provides stable airflow for the aftertreatment system and has a lifespan of 2 million kilometers. It is widely used in 12V/24V N14 engine systems in commercial vehicles, construction machinery, and special vehicles.
Product Images





Product Parameters
| Parameter category | Detailed Description |
| Part number | G5405644 |
| Applicable engine | 12V/24V N14 series T4 emission standard engine |
| Material | Nickel-iron alloy (with nickel content ranging from 10% to 30%), can withstand high temperatures above 700℃ |
| Pressure rating | Complies with Cummins high-pressure exhaust system standards |
| Sealing standard | It adopts a multi-layer metal gasket design to ensure no leakage in high-temperature and high-pressure environments |
| High-efficiency exhaust gas diversion | Optimize the design of the manifold channel to reduce the exhaust interference of each cylinder and enhance the response speed of the turbocharger |
| High-temperature durability | The nickel-iron alloy material has passed the 10,000-hour thermal cycle test, and the B10 service life reaches 2 million kilometers |
| Lightweight structure | Compared with traditional cast iron products, it reduces weight by approximately 15% and lowers the engine load |
Product Advantages
The 12V valve exhaust manifold, made of nickel-iron alloy, has passed 10,000 hours of thermal cycling testing and boasts a B10 life of 2 million kilometers, far exceeding the durability of cast iron manifolds. The 24V Cummins T4 manifold features an optimized exhaust passage design, reducing cylinder exhaust interference, improving turbocharger response speed, and meeting T4 emission standards, providing stable airflow for the aftertreatment system. Furthermore, the Cummins N14 manifold is specifically designed for the 12V/24V N14 series T4 engines, reducing pipe connection points, lowering maintenance frequency, and resulting in extremely low user feedback on its failure rate.




FAQ
Q: 1.What are the main technical parameters of the Cummins G5405644 exhaust manifold?
A: The Cummins G5405644 exhaust manifold is primarily made of nickel-iron alloy, with a temperature resistance exceeding 700℃. It has passed 10,000 hours of thermal cycling testing and has a B10 life of 2 million kilometers.
Q: 2.What are the installation precautions for the Cummins N14 manifold?
A: Before installation, clean the flange surface. It is recommended to use Cummins genuine sealant. Tighten the bolts diagonally in three stages with a torque of 80-100 N·m. A leak test is required after installation.
Q: 3.What are the material advantages of the G5405644 exhaust manifold?
A: Made of nickel-iron alloy, it is 15% lighter than traditional cast iron products, has excellent high-temperature resistance, a low coefficient of thermal expansion, and is less prone to deformation and cracking over long-term use.
Q: 4.What certifications are required for exporting the Cummins G5405644 exhaust manifold?
A: Export requires compliance with EU CE certification and US EPA certification. Some countries also require material certificates and certificates of origin. MSDS is required for sea freight.
Hot Tags: cummins 12v 24v n14 t4 g5405644 exhaust manifold, China cummins 12v 24v n14 t4 g5405644 exhaust manifold manufacturers, suppliers, factory, cummins engine connector, 【2881836-10】Cummins K19/K38/K50 5.9L 24-valve Intake Valve Repair Kit | Valve Repair Kit, 6 7 cummins thermostat, fuel injector wiring harness, Cummins hose fittings, cummins studs
