Product introduction
As a key component of the Cummins ISX belt, the 3696795F features an 8PK V-ribbed structure, manufactured from a composite material of neoprene rubber and polyester cord. It boasts excellent high-temperature resistance, oil resistance, and aging resistance. Optimized for the demanding operating conditions of heavy-duty diesel engines, it ensures reliable long-term transmission under high load and dusty environments. It effectively resists corrosion from diesel fuel, coolant, engine oil, and road dust, maintaining its elasticity and structural integrity even under harsh conditions such as high temperature, dust, and high humidity. It is an indispensable genuine Cummins ISX engine electrical system and cooling efficiency component.
Product Images
Product Parameters
| Parameter category | Detailed Description |
| Part number | 3696795F |
| Belt type | V-shaped ribs |
| Rib number structure | Youdaoplaceholder0 8PK (8 ribs, conforming to cummins heavy-duty engine standard) |
| Material composition | The main body is made of neoprene rubber (CR) and reinforced with polyester cord, featuring excellent heat resistance (temperature resistance ≥120°C), oil resistance and anti-aging performance |
| Applicable engine | Youdaoplaceholder0 Cummins ISX series (including ISX12, ISX15 and other models) |
| Installation direction | The grooved surface faces the crankshaft pulley, and the flat surface faces the tensioner pulley and the generator pulley to ensure correct meshing and transmission efficiency |
| Replacement cycle | It is recommended that be replaced every 2,000-3,000 operating hours, or be forcibly replaced during engine overhaul |
| Tension gauge | Youdaoplaceholder0 Standard tension range: 150-250 N (approximately 15-25 kgf), which should be calibrated with a dedicated tensiometer to avoid being too loose (slipping) or too tight (bearing overload). |
Product Advantages
As an original equipment manufacturer (OEM) component for Cummins ISX series engines, the 3696795F belt is specifically optimized for the synchronous drive of alternators and mechanical cooling fans. Its dimensions, tooth profile, and pulley grooves are perfectly matched, ensuring zero slippage, low vibration, and high transmission efficiency, eliminating power loss and system imbalance caused by non-standard parts. The Cummins OEM 3696795F belt offers an average service life extension of 30%–50%, and exhibits very few cracks, delamination, or abnormal wear within the recommended replacement interval of 2,000–3,000 operating hours, significantly reducing unplanned downtime and maintenance frequency, resulting in lower overall operating costs.
FAQ
Q: 1. Which engine models is the Cummins 3696795F fan belt suitable for?
A:The 3696795F is a Cummins original equipment fan drive belt specifically designed for the ISX series heavy-duty diesel engines. It is specifically designed to match their cooling systems, ensuring stable fan speed and preventing transmission mismatch or premature wear caused by non-original parts.
Q: 2. How to determine if the alternator belt of a Cummins ISX engine needs replacement?
A: Replace the belt immediately if cracks appear on the surface, the edges are frayed, the teeth are worn, or the tension is significantly reduced. Even if the mileage limit has not been reached, replacement is recommended after 6 years of use to prevent sudden breakage leading to generator failure or engine overheating.
Q: 3. What are the risks of using non-original belts on a Cummins ISX engine?
A:Non-original belts differ in material, tooth precision, and heat resistance, easily leading to slippage, abnormal noise, insufficient generator output, and reduced water pump efficiency. Long-term use will accelerate bearing wear, shorten engine life, and increase maintenance costs.
Q: 4. What customs clearance documents are required for exporting Cummins 3696795F belts to the United States?
A: A commercial invoice, packing list, and certificate of origin are required. The product must comply with US DOT and EPA material safety standards for automotive parts. Packaging must be moisture-proof and pressure-proof to prevent deformation during transportation.
Q: 5. What regulatory restrictions should be observed when exporting Cummins engine belts to the European Union?
A: It must comply with REACH regulations, ensuring that the belt material does not contain restricted PFAS or other perfluorinated compounds. A notification of Substances of Very High Concern (SHCs) must be completed in the SCIP database. Packaging materials should be recyclable and comply with the ELV directive.
Hot Tags: cummins isx 3696795f alternator ac fan belt, China cummins isx 3696795f alternator ac fan belt manufacturers, suppliers, factory, 5 9 cummins piston ring set, 64998C Cummins Engine Straight Hose Flexible 4 5 Inch Exhaust Pipe, cummins engine hose, Cummins stand alone wire harness, Cummins valve repair, injector wiring harness
