Product introduction
As a core model in the Cummins gear puller family, the ST647 Cummins gear puller, with its high reliability, has become a standard component in heavy-duty diesel engine overhauls and is a proven professional solution in the Cummins CAM gear puller field.
Product Images




Product Parameters
| Parameter category | Detailed Description |
| Part number | ST647 |
| Type | Mechanical three-jaw puller (non-hydraulic) |
| Applicable engine | Cummins ISX12, ISX15 |
| Maximum pulling force | About 15 to 20 kN |
| Screw thread specification | M36×3 (Metric coarse thread, high-strength alloy steel) |
| Clamping range | It is applicable to camshaft gears with an outer diameter of approximately 120 to 140 mm |
| Material | The main body of the tool is made of alloy steel (heat-treated), and the three claws are made of quenched carbon steel |
| Weight | Approximately 4.5 to 5.2 kilograms |
| Operation mode | Manually turn the screw, and through the axial thrust of the central screw, the gear is pulled out by the uniform force applied by the three claws |
Product Advantages
The Cummins ST647's three-jaw structure, screw thrust, and clamping range are optimized for the keyway fit of the Cummins ISX camshaft gears, ensuring even force distribution during disassembly. This completely avoids high-risk damage such as gear breakage and camshaft end face scratches caused by poor fit with universal pullers, making it the only disassembly method explicitly recommended by the repair manual. As part of the Cummins original equipment tool system, the ST647 strictly adheres to the Cummins CES certification system in material selection, heat treatment processes, and torque control standards. Together with original equipment cylinder liners, piston rings, and other four-piece sets, it forms a complete repair loop, ensuring that the engine's durability and performance are restored to factory levels after overhaul, significantly extending the overhaul cycle.




FAQ
Q: 1.Can the Cummins ST647 camshaft gear puller be used on other engine models?
A:No, the ST647 is an original equipment manufacturer (OEM) tool designed specifically for Cummins ISX12 and ISX15 engines. Its three-jaw structure and screw thrust parameters are only compatible with the keyway shape of the camshaft gears in this series. Using it on ISL, ISM, or QSL engines may damage the tool or core engine components.
Q: 2.Can a regular three-jaw puller be used instead of the ST647?
A:No, it is not recommended. General-purpose pullers cannot guarantee even force distribution, easily causing gear breakage, camshaft end face scratches, or keyway deformation. The ST647's self-centering design and high-strength screw allow for non-destructive disassembly, and it is the only safe option explicitly recommended in the service manual.
Q: 3. Does the ST647 puller require heating the gears when using it?
A:Yes, before reinstalling the gear after disassembly, it must be heated to 205°C and held at that temperature for 40–60 minutes to allow it to expand before it can be smoothly fitted onto the camshaft. After cooling, an interference fit is formed, ensuring transmission accuracy and durability.
Q: 4. Is ST647 a dangerous good? Can it be transported by air?
A:No, it is not a dangerous good. ST647 is a pure mechanical alloy steel tool, containing no batteries, fuel, or corrosive substances. It meets the IATA's non-dangerous goods standards and can be safely exported by air or sea.
Q: 5. What are the main modes of transport for ST647 pullers exported from China to Europe and America?
A:Mainly by sea, as the tool weighs approximately 5kg, is small, and has no dangerous properties, making sea freight low-cost and stable. For urgent orders, air freight is an option; no special declaration is required, and standard packaging is sufficient for customs clearance.
Hot Tags: cummins isx st647 cam gear puller, China cummins isx st647 cam gear puller manufacturers, suppliers, factory, 6 7 cummins thermostat, fuel injector wiring harness, cummins engine connector, cummins 6bt piston rings, Cummins hose fittings, cummins bearing thrust
