Product introduction
As a standard component for K19, K38, and K50 engines, the 5689594L bearing features standardized dimensions of 120mm inner diameter, 200mm outer diameter, and 58mm width. Combined with 14 high-precision rollers and a HRC 58–62 hardened surface, it achieves a rated dynamic load capacity of up to 385,000 N. Its thermal stability and wear resistance directly support engine overhaul cycles of up to 15,000–20,000 hours.
Product Images




Product Parameters
| Parameter category | Detailed Description |
| Part number | 5689594L |
| Applicable engine series | Cummins K19,K38,K50 |
| Bearing type | Tapered roller bearing |
| Structural features | Single row, detachable inner and outer rings, with solid brass cage |
| Size |
Inner diameter: 120.00mm Outer diameter: 200.00 mm Width: 58.00mm |
| Operating temperature range | '-40°C to+150°C |
| Material | High-carbon chromium bearing steel (conforming to ISO 683-1 standard), with surface quenched and tempered, hardness HRC 58-62 |
| Composite load bearing capacity | The conical roller structure can simultaneously and efficiently withstand radial force and unidirectional axial force, adapting to the complex working conditions of engine burst pressure and crankshaft torsional vibration. |
Product Advantages
The 5689594L bearing, as the "standard main bearing configuration" for the three main heavy-duty diesel engines K19, K38, and K50, achieves cross-platform component commonality, significantly reducing the complexity and procurement cost of maintenance spare parts, and improving service response efficiency. It adopts a single-row tapered roller structure, capable of simultaneously and efficiently bearing up to "385,000 N rated dynamic load and 520,000 N rated static load," precisely matching the harsh operating conditions of the K-series engines under high burst pressure and severe crankshaft torsional vibration.




FAQ
Q: 1.Do the Cummins K19, K38, and K50 engines use the same main bearing?
A:Yes, the Cummins K19, K38, and K50 series heavy-duty diesel engines all use the original equipment manufacturer (OEM) specified 5689594L bearing as the crankshaft main bearing. This bearing is a standardized design, ensuring cross-platform compatibility and maintenance consistency.
Q: 2.What type of bearing is the 5689594L bearing?
A: The 5689594L bearing is a single-row tapered roller bearing, specifically designed for high-combination load conditions, capable of withstanding both radial and axial forces simultaneously.
Q: 3. Does this bearing support heat-fit installation? What precautions should be taken during installation?
A:Heat-fitting or hydraulic pressing must be used. Impacting is strictly prohibited. After installation, the axial clearance should be controlled within 0.08–0.15 mm. A feeler gauge must be used for inspection to ensure zero-tolerance matching with the crankshaft journal and engine block bore positions to avoid off-center load failure.
Q: 4. Is the Cummins 5689594L bearing classified as a dangerous good for export?
A:No, it is not classified as a dangerous good. This bearing is a metal mechanical part, containing no flammable, explosive, corrosive, or radioactive components. It can be transported internationally by air or sea as ordinary mechanical equipment without the need for special dangerous goods declaration.
Q: 5.What are the special packaging requirements for international transport of the 5689594L bearing?
A:Customized, shockproof, and moisture-proof packaging is required. A wooden frame with pearl cotton lining is recommended. Each bearing should be individually sealed in a rust-proof paper bag. The outer box should be labeled "Precision Mechanical Parts" and "Moisture-proof and Shockproof." Avoid stacking and compressing multiple bearings.
Hot Tags: cummins k19 k38 k50 5689594l bearings, China cummins k19 k38 k50 5689594l bearings manufacturers, suppliers, factory, 6 7 cummins thermostat, fuel injector wiring harness, cummins engine connector, cummins 6bt piston rings, Cummins hose fittings, cummins bearing thrust
