Product introduction
As a standard component for 5.9, 6.7, and K19 Cummins bolt clamps, this product is made of heat-resistant alloy steel and features a high-strength design (10.9 grade), ensuring compatibility with global maintenance systems and guaranteeing long-term reliable engine operation. Cummins E5513961 Bolt clamps are critical safety components and must be replaced in pairs. It is strictly forbidden to mix non-original parts to avoid the risk of intake leakage, turbine efficiency reduction or pipeline breakage caused by differences in materials or preload, and to ensure long-term stable operation of the engine.
Product Images




Product Parameters
| Parameter category | Detailed Description |
| Part number | E5513961 |
| Thread specification | M14 × 1.5 |
| Total length of the bolt | 55–60 mm |
| The dimensions of the opposite sides of the head | 24–25 mm |
| Recommended tightening torque | 130–150 N·m |
| Preload force | ≈110–125 kN |
| Material | Made of heat-resistant alloy steel , in compliance with GB/T 1221 standard, it has excellent high-temperature oxidation resistance and creep resistance, and can withstand 500°C - 700°C exhaust heat radiation environment for a long time. |
| Strength grade | It is a 10.9 grade high-strength fastener , with a tensile strength of ≥1040 MPa and a yield strength of ≥940 MPa, ensuring a stable preload under continuous thermal cycling. |
Product Advantages
The Cummins E5513961 T-bolt clamp is specifically designed for connecting the turbocharger exhaust pipe and intercooler intake pipe flanges of 5.9L, 6.7L, and K19 engines. It can withstand high-temperature airflow (500°C–700°C) and severe vibration over extended periods, ensuring the airtightness and power response stability of the turbocharger system. Its innovative T-shaped double-arm design achieves simultaneous clamping of two flanges at a single point, effectively absorbing differences in thermal expansion and preventing pipe displacement, flange deformation, or airflow leakage, significantly improving system reliability.




FAQ
Q: 1. Why can the Cummins E5513961 T-bolt clamp be used with 5.9L, 6.7L, and K19 engines simultaneously?
A:The E5513961 is a Cummins officially certified cross-platform universal part. Its T-clamp structure and M14×1.5 thread specification are specifically designed for the turbocharger flanges of 5.9L, 6.7L, and K19 engines. Its dimensions and thermal expansion coefficients are highly matched, allowing a single part number to cover all three platforms, simplifying global maintenance spare parts management.
Q: 2. How does the T-bolt clamp ensure sealing performance in high-temperature environments?
A: Made of GB/T1221 heat-resistant alloy steel with a high strength of 10.9 grade, it can withstand long-term exhaust heat radiation of 500°C–700°C. Combined with copper-plated or zinc-plated surface treatment, it effectively resists preload reduction caused by high-temperature oxidation and thermal cycling, ensuring stable airtightness of the turbocharger system.
Q: 3. Why must Cummins E5513961 bolt clamps be replaced in pairs?
A:As a critical safety component in the booster system, aging of a single component can lead to uneven clamping force, causing pipe displacement, flange deformation, or airflow leakage. Replacing them in pairs ensures consistent thermal expansion compensation and avoids the risk of power reduction or pipe breakage due to mixing old and new components.
Q: 4. What is the installation torque requirement for the E5513961 bolt clamp?
A:The recommended tightening torque is 130–150 N·m, set according to the GB/T 3098.1 standard for 10.9 grade M14 bolts. This ensures sufficient residual preload under high-temperature conditions, preventing leakage while avoiding over-tightening and damage to the flange sealing surface.
Q: 5. Does the wooden packaging for the E5513961 bolt clamp require IPPC marking for international transport?
A:Yes, if wooden pallets or crates are used, they must undergo IPPC-approved fumigation or heat treatment and bear the standard IPPC marking.
Hot Tags: cummins t-bolt clamps e5513961 for 5.9/6.7/ k19 engines, China cummins t-bolt clamps e5513961 for 5.9/6.7/ k19 engines manufacturers, suppliers, factory, cummins engine connector, 【2881836-10】Cummins K19/K38/K50 5.9L 24-valve Intake Valve Repair Kit | Valve Repair Kit, 6 7 cummins thermostat, fuel injector wiring harness, Cummins hose fittings, cummins studs
